CBZXB - PROCELAIN WHITE W/B EPOXY, 98-1
- MSDS: CBZXB
- Manufacturer: PPG INDUSTRIES INC
- Product Name: PROCELAIN WHITE W/B EPOXY, 98-1
- National Stock Number: 8010-00N073269
Product Identification
Product ID:PROCELAIN WHITE W/B EPOXY, 98-1
MSDS Date:06/28/1993
FSC:8010
NIIN:00N073269
MSDS Number: CBZXB
Responsible Party
ALLISON PARK, PA 15101
US
Emergency Phone: 304-843-1300
Info Phone: 216-572-6111; 412-492-5555
Cage: DO542
Contractor
Telephone: 412-492-5555
Cage: DO542
Ingredients
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 40-45%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
ETHANOL, 2-BUTOXY-; (ETHYLENE GLYCOL MONOBUTYL ETHER)
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 5-10%
OSHA PEL 50 PPM, S
ACGIH TLV: 25 PPM, S
ETHANOL, 2-PROPOXY-; (ETHYLENE GLYCOL MONOPROPYL ETHER)
CAS: 2807-30-9
RTECS: KM2800000
Fraction By Weight: 2-5%
OSHA PEL N/K
ACGIH TLV: N/K
TOLUENE (SARA 313) (CERCLA)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 2-5%
OSHA PEL 200 PPM
ACGIH TLV: 50 PPM, S
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER; (TAP WATER)
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 25-30%
OSHA PEL N/K
ACGIH TLV: N/K
FILM FORMERS, RESINS AND ADDITIVES
Fraction By Weight: 15-20%
OSHA PEL N/K
ACGIH TLV: N/K
HAZS. SEEK CONSULTATION FROM APPROP HLTH
RTECS: 9999999ZZ
EXPOS INFO . ANIMAL STUDIES HAVE CLEARLY SHOWN
RTECS: 9999999ZZ
TISS, BLOOD, KIDNEYS & LIVER ASSOC W/THE ADMIN OF
RTECS: 9999999ZZ
118) . AVOID LONG TERM & RPTD CNTCT. PROD CNTNS
RTECS: 9999999ZZ
TITANIUM DIOXIDE DUST IN LONG-TERM STUDY DEVELOPED
RTECS: 9999999ZZ
THIS PIGMENT INDICATE NO INCRD RISK OF CANCER FROM
RTECS: 9999999ZZ
FROM COATINGS IS VERY LIMITED. SINCE OVEREXPS ARE
RTECS: 9999999ZZ
CNTNS AN ETHYLENE SERIES GLYCOL ETHER &/OR ACETATE
RTECS: 9999999ZZ
LIVER, BLOOD &/OR BLOOD-FORMING TISS. THERE IS NO
RTECS: 9999999ZZ
THIS PROD, CONTACT POISON CONTROL CENTER,
RTECS: 9999999ZZ
TO DETERM TYPE OF AIRBORNE CONTAMINANTS AGAINST
RTECS: 9999999ZZ
EXPOS LIMITS, LEL BELOW STATED LIMIT & TO REMOVE
RTECS: 9999999ZZ
& FULL LENGTH FACESHIELD .
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: HARMFUL/FATAL IF SWALLOWED.
EYES: SEV IRRIT. REDNESS, ITCH, BURNING SENSATION & VISUAL DISTURBS
MAY INDICATE EXCESS EYE CNTCT. SKIN: MAY CAUSE MOD IRRIT. MAY BE
HARMFUL IF ABSORBED THRU SKIN. PRLNGD/RPTD CNTCT MAY CAUSE
ALLERGIC SKIN RXN. DRYNESS, ITCH, CRACKING, BURNING, REDNESS &
SWELL ARE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CNDTNS ASSOC W/EXCESS SKIN CNTCT.
INHAL: VAP & SPRAY MIST HARMFUL IF INHALED. MAY CAUSE IRRIT &/OR
ALLERGIC RESP RXN IN LUNGS. VAP IRRIT EYES, NOSE & THROAT. RPTD
EXPOS TO HIGH VAP CONCS MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN
&NERVS SYS DMG. EYE WATERING, HDCHS, NAUS, DIZZ & LOSS OF
COORDINATION (SUPDAT)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.
First Aid
First Aid:INGEST: IF SWALLOWED, DO NOT INDUCE VOMIT. EYES: FLUSH EYES
IMMED W/PLENTY OF WATER FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED
W/PLENTY OF WATER FOLLOWED BY WASHING W/SOAP & WATER. INHAL: IF
AFFECTED BY I NHAL OF VAP/SPRAY MIST, REMOVE TO FRESHAIR. APPLY
ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF INGEST,
ANY TYPE OF OVEREXP OR SYMPS OF OVEREXP OCCUR DURING OR FOLLOWING
USE OF (ING 16)
Fire Fighting
Flash Point Method:PMCC
Flash Point:94.0F,34.4C
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY CHEM
OR UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA (SUPDAT)
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP
& POSS AUTOIGNIT/EXPLO WHEN EXPOSED (SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE OR OTHER ABSORB MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS IC FLAM LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
SYSTEM, READ THE MATERIAL SAFETY DATA SHEET(S) FOR THE OTHER
COMPONENT(S) BEFORE BLENDING AS THE RESULTING MIXTURE MAY HAVE THE
HAZARDS OF ALL OF ITS P ARTS.
Exposure Controls
Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
CONTROLS, VAP EXHST OR FRESH AIR ENTRY. NIOSH APPRVD (TC-23C) AIR
PURIFYING OR AIR SUPPLIED (TC-19C) RESPS MAY ALSO REDUCE EXPOS.
READ RESP MFR'S INSTRUCT IONS & LITERATURE CAREFULLY (ING 17)
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF LISTED INGS BELOW THE LOWEST SUGGESTED (ING 18)
Protective Gloves:GLOVES OF NITRILE, NEOPRENE OR LATEX.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 19)
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
WEAR PROTECTIVE CLOTHING INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA: CLASS IC FLAM LIQ FIRES. FIRE FIGHT PROC: TO EXTREME
HEAT. IF WATER IS USED, FOG NOZZS ARE PREF. EFTS OF OVEREXP: ARE
INDICATIONS THAT SOLV LEVELS ARE TOO HIGH. INTENTIONAL MISUSE BY
DEL IB CONC & INHALING CONTENTS CAN BE HARMFUL/FATAL. CHRONIC:
TOLUENE APPEARS ON THE NAVY LIST OF OCCUP CHEM REPRO (ING 7)
Chemical Properties
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:16.6
Vapor Density:HVR/AIR
Spec Gravity:1.45
Evaporation Rate & Reference:42 (BUOAC=100)
Solubility in Water:36.7%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF CHEMICAL
FAMILY & ANY SOLVENTS LISTED.
Percent Volatiles by Volume:58.80
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING/BRAZING/FLAME-CUTTING MAY PRDCE FUMES INCLUDING CO,
OXIDES OF NITROGEN.
Disposal
Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEME NT FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.